Recent content by BMW RACER

Hey troops. Excuse my lazyness I'm trying to help someone out quickly. Where is ST in the GCR? I know nothing about this new class Thanks in advance

Just got back from my first race of 2007 with Calclub at Fontana. I cleaned up in ITR! Oh yeh, I was the only one entered. Has anyone else raced in ITR yet? If so, I wonder who was the first person in the whole wide world to win ITR?

Hey guys. I'm mounting a fuel cell in the rear of my E36 enduro car and am pondering the choices for building the suporting frame. I looked in the GCR and while SCCA seems concerned about the fuel cell you use they don't seem to care how you mount it, as long as it's more than 6" above the...

Maybe I was only reading what I wanted. But I know ITR can run up to 8.5" wide wheels, but I also thought we could run up to 17" max diameter. Looking through the 2007 ITCS I noticed the E36 325 is still stuck with 15"/16" diameter. That really restricts wheel choice (Tirerack has none)

My apologies if this has been covered before. If you can position the cell within 12" of the original tank, there is no maximum size? If you have a car like a BMW the ITCS states "trunk mounted fuel cell no larger than stock" Now then: If you can make it fit in your BMW, can you mount a...

Right now ITS spec 325s can run in BMWCCA racing in JP with no restrictor. Any idea if ITR spec BMW will be classified for JP?

Fellow E36 racers. Now that ITR is done, what are you going to do? Stick with ITS (More competition) or move up to ITR (Go faster) I'm pretty sure I'll go with ITR if only to show support. I don't think there will be many people running for a while. Hopefully I can find some T1 cars to chase...

Hey racers. Just curious, how many of you have fire systems and have a spare bottle at the track? I don't, but I do also have a 2.5 lb hand held in the car as back up. TO ALL AT WATKINS GLENN: ONLY TWO HOURS 'TILL BEER TIME! CHEERS

Hey Guys. Thinking about this E36 SIR or 300 extra weight stuff. E46 is looking like a good bet. SAME: Size motor, compression, valve size, gear ratios, brakes, wheel size etc. ALMOST THE SAME: Aero, track and wheelbase, weight distribution and general layout. NO RESTRICTORS AND ONLY 150...

Looks like we're stuck with the 29mm SIR. I'm not happy about it, but I'm willing to give it a try. I'm on the list with Raetech to trade in my 27mm piece. Any thoughts out there as far as mounting this thing? Obviously after the air mass sensor. How far away from the throttle should it be? Can...

Hey folks. I bought a 27 mm SIR from Raetech a couple of weks back when this whole deal took off. I haven't fabricated a system up to use it yet for two reasons. 1/ Not sure how this SIR deal is going to shake out. 2/ Not quite sure how to legally get it to fit the car. I did however attach...

I'm posting this for a racing friend......if you run across deals that are just too good of a deal...... Please be on the lookout for a stolen Mighty Mover 34 foot enclosed tri-axle trailer. The trailer with racecar and tools was stolen between Tuesday night January 31 and today from 5th and...

Hey racers. Here in Southern California we're think of doing some tweaking to out current ITE rules. I'm curious what other regions are using for rules in ITE. If you could send me a link to your rules that would be great. [email protected] Thanks in advance.

Hey there endurance fans! Mark your calanders now. March 4th 2006 we're having a ten hour race. Put on by California Sports Car Club. It's a "non demonational" race (not just SCCA) Check the web site that is under construction: http://www.raceten.com/ Think about it, were would you rather be in...

Hey there West Coasters. CalClub is hosting a National / Double Restricted Regional at Fontana July 30-31. The Regional classes are: ITE,S,A,B&C. Spec Miata, Pro&SpecRX7. We're trying to make it a little extra special. So if your not doing anything that weekend. COME ON DOWN!! First 70 entries...