Recent content by cjb25hs

Anybody put one in or know anyone that has yet?

What is the easiest way to disable the stock ignition switch steering lock. I have heard prick punch, loctite? Switching car back to stock wiring as much as possible and I know I have to disable the steering lock What say the experts

So who all does them say between PA and Florida and makes good reliable Power that's not going to be huge $$? I know that ESpeed Estus White does as well as RP Performance at Sumitt Point and Ludwig did the build on the motor that is in the car. Not looking for the all out 10/10ths build just...

So what is the best offset wheels to run? I have 3 different sets of wheels that all came with the car: 1 set welds are the lightest around 12lbs 1 set of no names heavy 1 set of no names heavier Looking to pick up a set of 6 that are all the same, somewhere in the 11-12 lb range, just...

I look at both tires and know there is no contingency so that makes things even. Which tire will be faster and offer the best life. The BFG's I have only read opinions based on heavier cars. I know the kooks are just as fast as the Hossiers but with alot better life. Car is an ITA Neon...

Well I have all 4 Koni yellows off the car for the install of my GC kit. The rears are still stock valving and compression seems to be pretty equal. The fronts I had Truechoice rebuild/revalve over the winter. They have 1 double regional, a 1 hour enduro and 5 autocross runs on them since...

Just like the title says, looking to see who is using what. I am looking at the GC kit, but I have heard people not liking them, although Lee Grimes likes their stuff he told me. I have also talked with Truechoice but they want $1150.00 to do a conversion using koni sleeves, circlips, ERS...

Looking at updating my ACR to GC Sleeves and ERS Spirngs. Just wondering what everyone's experience is with the GC stuff. Had them on a street/autocross car for about 50K in Pittsburgh, PA year round. Never used in a w2w application. I have heard that they a great and that they suck, Just...

I am trying to gather some data out there from the IT community. The Steel Cities Region is struggling to get better turnouts at Double Regionals being held at Beaverun. I know that car counts are down some all over, but just trying to see what people think about Beaverun.

Just wondering if anyone has any experience running them in the dry at full tread?

I have not been able to find anything out yet in regards to any Tire Manufacturer. From what research I have done. Anybody know if anyone is going to offer anything on the Regional level?

I have been shopping around for some hawk blues for the neon. Looking for the best place to get them. Seems like those with the best prices never have them and of course the opposite. Well I guess if you have have them you can get the $$$ Where does everybody else buy their pads?

Just curious if this is a big deal. I could not find anything in the GCR about it. The crack is in the middle to the right side of the windshield.

Just curious what everybody is using. I was planning on just using the G-force sprint car net, but looking for suggestions. Thanks

I have a 95 neon that I am converting from Spec Neon to ITA. When I got the car all the interior other than the dash and front door panels was removed. The GCR is a little unclear on this question, on a 4 door car are the rear door panels allowed to be removed?