Recent content by jamsilvia

Hi guys - I am currently running the stock fuel tank. A year or so ago, the internal baffles came untethered at the welds (and so would float around hitting things like the pump and fuel level sender), and so I just removed them. I've been running without them - but I'm sure the fuel pump is...

OK, so here's the story - maybe someone can shed some light: I've got an ITS S13. The car has always run high oil temps, so I've got an oil cooler installed in front of the radiator. I also had noticed a good bit of oil starvation on right handers, so I've also got an accusump plumbed in. I...

This is mostly for the DE crowd (and I think the SCV is only on the S13) - er....maybe crowd is the wrong word to use.... But anyone give me your vote. Anyway, there's a metric ton of stupid rubber and metal vac lines to run the FPR and the SCV. Does anyone have an opinion as to whether the...

I'm looking for someone close to the Washington, DC area to rebuild a diff for me. I've got a R200 that I need a 4.3 R&P put into (it currently has the 4.08 stock). I'm going to look into York Automotive - but in case that falls though, does anyone else have any good recomendations??? I live...

Are any of you 240 guys with the non-ABS front brakes heading down to VIR this weekend to run with NASA??? A friend of mine has the non-ABS brakes on his HPDE car, and when he checked on the status of his pads, they're too thin to run. So if anyone would be cool to bring an extra set of pads...

(this is for a S13 240SX, btw) So I bought the NISMO motor mounts, and just installed them with my new non-holed motor. I was told by a friend that they were taller....but I didn't know how much exactly. They're QUITE a bit taller. About 1/2" or so. Looking at where the oil pan sits...

Does anyone know the brake line sizes for the 240's?? Also, I need to know the fitting sizes for the lines where they go into the M/C. joe

So I've been doing a lot to try and keep the diff cool enough to last and not burn the fluids. Someone mentioned that they just change the fluid after every weekend. Well, I kinda don't have that luxury in an enduro! After about 1 hour on track, the temps are in the 250 range. The diff temp...

What setups do people recommend for stabilizer bars? I've heard people running much stiffer front and rear bars, and I've heard of people running a stock or slightly upgraded front bar, with no rear bar. Any recomendations? Thanks! joe

Does anyone have any recommendations of running a particular LSD choice? I hear quaife is a great choice, but I don't have that kind of money. Other options I've seen available are the stock VLSD, the NISMO (or similar) cheaper clutch type LSD, and the better Kaaz or Cusco clutch LSDs. I've...