Recent content by TBreu007

Double entendres are fun. I have new stock motor mounts and a new transmission mount, but the shifting in the 240sx is still ugly. I've driven many other cars on track and I have never had shifting problems like these...about 10% of the time I shift into 4th but hit reverse or 2nd instead. I've...

I have a KA24DE that was professionally rebuilt, but not re-dynoed after it grenaded on me a while ago. I have the car completely back together now, but it has some issues. 1) The idle will hunt from almost stalling at 500 rpms and then will shoot up to 2500 rpms then back down, etc. I...

Okay, finally found someone to make a oil pan for a reasonable amount. The price is dependant on the number needed, but should be in the $400-$500 range. These are TIG welded aluminum with billet aluminum rails with about a quart extra capacity and all the baffles and windage trays you could...

Can anyone suggest a tubing supplier in S. FL? I need another piece of 1.75" for my ITS car's cage and some 1.5" for a new LP/HP mini project. Thanks, Tim

Does anyone know where I can pick up an oil pan for my KA24DE with baffles, windage tray, etc? My engine builder highly recommended an aftermarket (or an accusump) since the KA's pan isn't the greatest. I know Greddy makes one for the SR20's...what about the KA's? Thanks, Tim

I just finished installing my suspension bits with the new spherical installed. Everything went together just fine. The travel on the front suspension is smooth as silk, but the rear is super tight. I didn't have my factory shop manual with me for proper torque specs, and even if I did those...

I know most people recommend 4.36 gearing for an ITA 240sx with 225/45/15 wheels. What about a ITS 240sx with 225/45/16 wheels? I wanted to go with 16" wheels for an extra little bit of rubber on the track and for looks, but if an ITS 240sx is making power somewhere between a E36 BMW and a RX7...

I'm in the process of building a S13 240sx for ITS right now. I've seen a couple posts where people ask what suspension others are using for the 240, but not many people reply to those posts. I was thinking about something a little better than Koni's strut insert for the front, but if everyone...