Search results

  1. T

    any races at gingerman using new layout?

    supposed to be done in June per their site: http://www.gingermanraceway.com/ will any events there be using the new layout?
  2. T

    ITAC or CRB Board Minutes for Fastrack?

    i was just perusing the current issue of Fastrack and was struck by various groups having minutes of conference calls; Solo Events Board Road Rally Board Rally Cross Board why isn't there an equivalent for the ITAC and/or CRB? is it the old adage about watching sausage being made?
  3. T

    please help me understand the ITB Honda issue

    i thought i would pattern this question after Ray's Audi thread. so here is the issue as i see it and have compared two specific hondas in a note that was sent to the BOD and cc:ed the CRB and ITAC (+ K, since he was still listed on the SCCA website). Please note that Honda's engines and...
  4. T

    updating sponsor list for ARRC?

    how do i update/modify the sponsor section for the registration list? http://www.motorsportreg.com/index.cfm/event/event.status/uidEvent/0B78EEB7-D676-AF6D-F2029C024FC94AEF i just signed up and did not see any place to change the sponsor section. others that have registered at...
  5. T

    radiator rules question

    okay, it says same location and same plane and implies must block off any new opening; but it can be smaller right? and if it is smaller, that is not really the same location is it? so original location means between the engine and the front bumper? same plane means if it was vertical, i...
  6. T

    great lakes guys crossing into canada and racing?

    i went to Mosport to spectate last weekend and aspects of the track look really appealing (elevation changes, etc.). but the lines at the bluewater bridge were relatively bad......... so has anyone crossed there since the increased border security, etc. and have any helpful hints? Greg Amy...
  7. T

    trailer jack post thrust bearings?

    my trailer jack started making odd noises and was getting harder to turn. i pulled it apart and found numerous BB sized ball bearings in it and what appears to be a failed race. i know that i have likely exceeded the 3000# static and 2000# lift limits since frequently i am jacking up the...
  8. T

    Changing tandem axle trailer tires when loaded

    on the way back from IT SPEC-tacular and seeing various folks on the road side changing tires, i realized that my race jacks are not rated for the one side of my enclosed trailer when it is loaded. i have a 1.5 ton aluminum race jack and probably ~9000 #'s in the trailer total. is this why...
  9. T

    Air Dam & Splitter attachment Points & COA

    anybody understand this? http://www.scca.org/documents/Fastrack/09/08/09-fastrack-aug-coa.pdf [/SIZE] [/SIZE][/FONT]
  10. T

    mounting tool chests in trailers?

    i have the typical Sears homeowers (non PRO) tool chest with base and two sets of drawers. i have had the base in the trailer for quite a while and am adding the drawers. i have the base mounted to the wall with just a couple of ~ 1/4" by 1" self tapping screws like the ones used to install...
  11. T

    rollcage mounting area limitations?

    The GCR states 144 sq. inches and no more than 15" per side and can be in multiple planes; Is this a maximum of 15" as layed out prior to cutting or bending to change planes? my CRX has two "levels" where the main hoop are typically attached. The most obvious is the "floor" of the primary...
  12. T

    anyone attending SCCA convention and/or taking SFI exams?

    cross post from rrax just looked at the schedule and saw the SFI related testing/training; http://www.scca.com/documents/Convention/09%20Schedule%20web%20version%205.pdf Club Racing SFI Tech Inspector Exam Shop Talk SFI Solo Exam is anyone going and planning to attend the Safety Awareness...
  13. T

    "accuracy" of scales for practice day & the ARRC?

    will there be scales for the practice day? and are the scales level enough to be accurate for corner weighting a car in addition to total weight? not questioning if they are accurate for total weights (take that as a given), but i wanted to check corner weights. tia, tom
  14. T

    tire delivery assist? from VIR 13 hour to ARRC

    i want to get four 14" tires from Phils Tire Service. he will be at the VIR 13 hour. could anyone help out and take these to the ARRC? tia, tom
  15. T

    arrc facilities: showers & power?

    looked at the overall map of the track http://www.roadatlanta.com/trackmap.lasso and am seeing camping areas but are there showers as well near the paddock? and is there power typically available in the paddock or is it strictly generators? tia, tom
  16. T

    can i re-wire ignition to have igniter unit outside the distributor?

    if i wanted to pursue an updated ignition system for my ITB car (not sure at all possible yet...), can i have the newer larger igniter in a different location that would be outside the distributor? the first gen crx ITB distributor is as follows and 11 is the igniter: the newer crx's are as...
  17. T

    2008 IT Spectacular Videos

    looked and did not see another thread: IT Fest Sunday ITB race 2 http://video.google.com/videoplay?docid=6665878744908481105&hl=en race start at 4:45 opportunity at 37:45 spin at 39:50
  18. T

    ride/trailer share from michigan to ARRC?

    it looks like the second car in our plan to go the ARRC cannot make it. i have a 30' pace trailer for my ITB crx. can get another crx or civic or similar size/weight car in it. anyone in michigan going to the arrc that needs help with trailering? would like to save some fuel $$ on the...
  19. T

    anyone buying costco soybean oil for diesel?

    soybean cooking oil is reportedly about $2.40 per gallon at Costco. anyone diluting their diesel fuel yet?
  20. T

    mazda cage mounts per Sportscar

    i am ignorant in how miatas are constructed but have a question regarding the picture on page 58 of the March issue of Sportscar. most mounting plates i have seen consist of plate welded to three planes for strength purposes but this looks like another piece of plate has been welded as a...
Back
Top