Search results

I got wind of something odd when I received a semi-cryptic email from NeOhio region promoting their double regional at the end of July as one of the last chances to race at NL this year with the old configuration. I jumped to the track website and to several region's websites and there was no...

This past weekend I raced the Fun One at Watkins Glen. During the ITA/ITS race on the short course, Sunday, I was punted from the track around lap five. I was exiting the carousel when Ben Phillips ITS#33 attempted an inside pass as I was heading toward the apex. I went up on two wheels and...

Is the First Gen RX7 a good fit with ITB? Most likey it is. However, when I have been included with the ITB and ITC cars I have been midpack at best. This is largely due to a lack of tuning and seat time on my part. At Nelson Ledges this year , I ran in the 1:26-1:28 range, and Scott Nutter...

I have a first gen. ITA RX7. I have heard of some different variations in wiring a MSD 6A with using one MSD or two, and even using three coils. What would you recommend and how would you wire it ? Thanks for all responses. Bill Emery Glen Region ITA#23

It even has a tow hitch. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...9&category=6327 Bill Emery Glen Region ITA#23

I would appreciate any advice regarding attaching an airdam to the front of a 1st gen. RX7, the routing of the ducting and any modifications needed. The airdam I have extends across the entire front of the vehicle to the front of each wheel well. I do not have the backing plates that Mazda...

I am "planning" to race at Mid Ohio this weekend for the first time. It will also be the first time I have had the car out in nearly two years. Following a wreck at Watkins Glen, I redid the car. I have installed a "G- Force" suspension, fuel cell, and exhaust among many other time consuming...

I thought I was in the final prep. stage. While my wife was hitting the brake pedal and I was attempting to bleed the system, we could not get any significant pressure. Additionally, there was a unusual "whooshing" sound coming from the engine bay and the reservoir had large bubbles when the...

I am attempting to install a "Fuel Safe" 15 gallon cell in my ITA 1st generation RX7. Underneath the rear of the car I have recently installed the "G-Force" panhard set-up and I have 3in. exhaust begining prior to the axle to the muffler. It seems like a tight fit. I would greatly appreciate...

I am attempting to remove the rear discs on the stock 3.93 LSD to have them machined or replaced. I do not think this differential has ever been out of my car since every bolt and brake fitting seems to be seized. I removed the two screws (with an impact wrench) and I thought the disc would pull...

I would like to upgrade to a lighter set of wheels for my ITA 81' RX7 from the stock wheels. Various suppliers are very positive about the wheels they sell which does not help too much. Any reccomendations based in experience would be a great help. Thank you.