Search results

So, I got to fat for my seat I've had for 17years, and time for a new one. Any strong feelings/recommendations? I'm 6'2" 230. I've got a sparco sprint available, and I fit, but its a bit snug and the sides don't come up far enough. and there's no shoulder support. I like Sparco in general but...

Ok, I know this is been done to death, but I'm feeling extra retarded and don't want to screw this up. I have my SW installed, but don't have the proper alternator cut done yet. I have the switch in the Ground wire (and don't plan to change that for various reasons). For the other switch parts...

Anybody know if its worth it on the 4age? wisdom used to be there was not much to be had in this motor (unlike the hondas).... I'm also looking for someone within reasonable drive distance from Cincinnati who could do a baseline dyno, then tune the new box and redyno... Thnx. :eclipsee_steering:

So just got a transponder and am mounting to the car. 1. How good a window does it need? I riveted it to the side of the front frame horn a couple inches up from the bottom. Will that be ok? 2. Any concern with using the keyed 12v+ that goes to the coil for the hot power? (my kill sw is on...

So, the rules say you have to have a 1 qt min capacity oil catcher for any valve cover vent. I also hear lots of folks say they just use their washer reservoir for for it... but is that legal? You'd have to put a hole in it to do that wouldn't you? I think some of the rules are a bit petty, but...

Been out a while, and just freshened up my car. I have a Toyota (former celebrity challenge car), so I usually go with the theme from the challenge cars, but the place that does those is crazy expensive. I'd like some snazzy graphics and wonder where to get them. Thoughts?

I've been out of racing a while, and am updating my cage. Used to be some language about seat back support, but I'm not seeing that in the 2009 GCR. What's the current practice? My seat is 6" away from the main hoop, and currently I have a tube with a curved plate on it welded to the cage to...

My switch isn't wired right (doesn't shut down the alternator), so I need to fix it. I understand about needing a fancy switch to not blow the diodes, but couldn't you just interrupt the wire from the key (in addition to interrupting the main battery cable) to shut it down? TIA..

I have 1.5" roll cage tubing, and need to update to "Nascar" bars.. my local guy can only bend 1 5/8" tube.. Can I use the bigger tube, or do I have to find somebody else? TIA

Hi all... After a few years off, I'm getting my ITA Toyota back in shape. I used to run a open Supertrapp out the back, but want to go out the side now. Any recommendations for a muffler? I was thinking of just using a Vibrant SS resonator.. (I have one as part of the exhaust system on my street...

My buddy just bought an Rx7, and I'm wondering what some of the basics are for this car? - I'm familar with the rules and general building, but specifically to this car. e.g. Should he keep or dump the power steering? Best Camber plates, strut bars, F/R spring rates etc? Starter alignment...

Me and a bud just bought one to play with, and wondered if it would be worth bothering with in IT (If not, we'll just use if for track days and probably the 24hrs of Lemons).

Kinda considering a 92-96 E36 325 for a next race car (have a fully prepped ITA car now). Is this a good choice or is there better? Would it be better to run a 328? or? If I build a new one, it will be an E36 something, but not sure which one, or what class, or what years to get/avoid.... advice?

I'm kinda considering moving up from ITA to ITS or ITR, and was thinking a 3-series. Pro's/cons? best year? was thinking about ITS 92-95 325. I know this is the BMW area, but is the 325 good, or is there better in ITS?

I'm just getting back into IT after a few years off.. I'd like a nice aluminum touring car style tow hooks if possible (for AE86 Toyota)

I've been out a few years and need to get my cage mods done to be legal. Anybody have any idea where I might get them done (preferably by a GOOD fabricator, not a hobbiest)? I'd like to get it done right away, so I can finish prep work on my repaint. Trying to get ready for a fresh start next...

I've been out a few years... I run IT/A in a Rear wheel drive Toyota (205/55-14) Whats the Hot ticket These days? I'm understanding Hoosiers? What's second best? I hear the Hosers wear like butter on hot asphalt. I'm doing a track day in a few weeks (LOTS of time) and want something that I...

I've been out a few years, and am freshening up the car. I last remember that you can replace the bushings, but can I replace them with Heim joints? I have a 5 link rear end, and a heim jointed panhard bar (since 1990), but can I do that for the 4 links too? Thanks...