Shine Racing

chewy8000

chewy8000

New member
Anyone know if someone else is making these. Shine racing discontinued them and sold there last couple sets. I spoke to the owner and he said there won't be another production run.
 
I manufacture a complete LCA spherical bearing package for the Honda and Acura crowd. If the concept is similiar, I might be able to have my machinist manufacture a few sets. Can you get me more details of the installation.

Tom Blaney
 
I am in the process of making some for my Rabbit, if they turn out as I have planned I could make an extra set or two if anyone is interested.
 
I am also making some SLOWLY.....for the A1. the A2-4 is much easier.
I hope there worth a second or 2? I have you coverd Dave W
also making on the car wheel brg presses, for a1-a4s. and the bolts to get the hub off easly.....
 
I am also making some SLOWLY.....for the A1. the A2-4 is much easier.
I hope there worth a second or 2? I have you coverd Dave W
also making on the car wheel brg presses, for a1-a4s. and the bolts to get the hub off easly.....
[/b]
Click to expand...

I'd be interested in both...
 
the press and bolts is about 65bucksish? A1 and some A2s only, but i have diffrent cups for the later A2s and A3s.

I have the front part of the C-arm nailed down, but the rear is not compleat.

Lael
 
I've had great luck with pieces from http://247-parts.com/

armbushings.jpg


Tell them Kirk sent you.

K

EDIT - oops. These are for a MkII/III but I think they have earlier applications, too.
 
I am trying to keep everyones 02 and newer vw/audis on the road, (cough Keycom)and i bought an 84 jetta coupe that had to have a 16v, but i orderd the berrings for the rear, so in a week or so i will have a prototype?MK2s are much more simple :bash_1_:

I can get NEW german C-arms for 25 bucks each, so it will be a compleat unit.

I will keep yall posted
 
Lael,
If you get around to doing A1 front/rear cassette/bearing setups this winter, I would be very interested in a set for my Bunny.
 
You must log in or register to reply here.
Back
Top